Las láminas de caucho son un material industrial común que se utiliza en aplicaciones como cribas vibratorias.,cintas transportadoras,y sellos. Al seleccionar láminas de caucho,¿Cuáles son algunos consejos a tener en cuenta??Aprendamos sobre esto de Jingdong Rubber.
Al seleccionar láminas de caucho,preste atención a los siguientes seis factores:superficie,pintar,material,estructura,vinculación,y densidad y dureza.
1.Rubber Sheet Surface
Durante el proceso de fabricación,rubber sheets may have impurities or untreated surfaces.These impurities or rough surfaces can make the rubber sheets easily damaged,easily contaminated,and reduce their lifespan.Therefore,when selecting rubber sheets,pay attention to the surface treatment.
2.Quality of Paint on Rubber Sheets
Place the floor in a well-lit area and look for bubbles,dots,and orange peel on its surface.Then,check whether the paint surface is rich,full,and flat.
3.Material of Rubber Sheets
The common materials of rubber sheets include natural rubber,caucho butílico,and nitrile rubber.Among them,natural rubber has better flexibility and elasticity,while butyl rubber and nitrile rubber have better wear resistance and oil resistance.Choose the appropriate material of rubber sheet based on the specific use environment and requirements.
4.Structure of Rubber Sheets
Check whether the structure of the rubber sheet is symmetrical and balanced by looking at the two ends of the rubber sheet.If it meets the symmetry and balance principle,the structure will be stable.
5.Bonding of Rubber Sheets
Check whether the layers of the rubber sheet are bonded tightly by hand.If there is no layer separation,it means the bonding is good.
6.Density and Hardness of Rubber Sheets
The important parameters of rubber sheets are density and hardness.Generally,the higher the density of the rubber sheet,the better its strength and durability.The higher the hardness index,the higher the density of the rubber sheet,and the better its flexibility and elasticity.When selecting,also choose the appropriate density and hardness of rubber sheet based on the specific use scenario and requirements.